Paper
19 March 2015 Thermal effect induced wafer deformation in high-energy e-beam lithography
Author Affiliations +
Abstract
The incident surface power density in Massive Electron-beam Direct Write (MEBDW) during exposure is ~105 W/cm2, much higher than ~8 W/cm2 ArF scanners and 2.4 W/cm2 EUV. In addition, the wafer’s exposure in vacuum environment makes energy dissipation even harder. This thermal effect can cause mechanical distortion of the wafer during exposure and have has a direct influence on pattern placement error and image blur. In this paper, the thermo mechanical distortions caused by wafer heating for MEB system of different electron acceleration voltages have been simulated with finite element method (FEM). The global thermal effect affected by the friction force between the wafer and the wafer chuck as well as different thermal conductivities of the chuck material are simulated. Furthermore, the thermal effects of different lithography systems such as EUV scanners and conventional optical scanners are compared. The thermal effects of MEBDW systems are shown to be acceptable.
© (2015) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
P.S. Chen, W.C. Wang, and S.J. Lin "Thermal effect induced wafer deformation in high-energy e-beam lithography", Proc. SPIE 9423, Alternative Lithographic Technologies VII, 942310 (19 March 2015); https://doi.org/10.1117/12.2085100
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Distortion

Thermal effects

Semiconducting wafers

Silicon carbide

Silicon

Finite element methods

Scattering

RELATED CONTENT


Back to Top