Paper
27 March 2015 Inductive wireless sensor-actuator node for structural health monitoring of fiber reinforced polymers by means of Lamb-waves
Oliver Focke, Mariugenia Salas, Axel S. Herrmann, Walter Lang
Author Affiliations +
Abstract
Wireless excitation of Piezo-Wafer-Active-Sensors (PWAS) was achieved using Low-frequency coils produced via Tailored-Fiber-Placement. Carbon Fiber Reinforced Polymer behaves as conductor and depending on the frequency it shields radio waves; this effect is rising at high-frequency. A high permeability material was placed under the highfrequency antenna and re-tuning was performed to improve the quality of transmission. In this manner sensor responses were successfully transmitted wirelessly by analog amplitude modulation. The signals were evaluated to verify the functionality in presence of defects like delamination or holes. Generated power was confirmed to be enough to excite the actuator.
© (2015) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Oliver Focke, Mariugenia Salas, Axel S. Herrmann, and Walter Lang "Inductive wireless sensor-actuator node for structural health monitoring of fiber reinforced polymers by means of Lamb-waves", Proc. SPIE 9435, Sensors and Smart Structures Technologies for Civil, Mechanical, and Aerospace Systems 2015, 94352V (27 March 2015); https://doi.org/10.1117/12.2083778
Lens.org Logo
CITATIONS
Cited by 2 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Sensors

Actuators

Structural health monitoring

Antennas

Receivers

Electronic filtering

Fiber reinforced polymers

Back to Top