Paper
23 September 2015 Investigation of TMA systems with different freeform surfaces
Y. Zhong, H. Gross, A. Broemel, S. Kirschstein, P. Petruck, A. Tuennermann
Author Affiliations +
Abstract
Three mirror anastigmats (TMA) are telescopic optical systems with only plane symmetry, that allow for good image quality without any central obscuration. The complexities of manufacturing and alignment can be reduced by fabricating the first mirror and the third mirror in one piece and defining a common axis of all the mirrors. It is attractive to use off-axis used aspheres and to come to an acceptable performance with the smallest number of freeform surfaces. In this paper, different types of freeform surfaces are considered to evaluate their potential. In the performed case study, the correction of spherical aberration and coma is best corrected in the pupil with the second mirror and to select the Zernike representation with remaining x-symmetry is one of the best ways to do this. The use of the Chebyshev polynomials also gives good results. Furthermore it is found, that the first mirror and the third mirror are quite beneficial to be modelled as off-axis aspheres of the Q-type. The result shows that a combination of two Q-aspheres with a Zernike surface at the second mirror is one of the most favorable combinations.
© (2015) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Y. Zhong, H. Gross, A. Broemel, S. Kirschstein, P. Petruck, and A. Tuennermann "Investigation of TMA systems with different freeform surfaces", Proc. SPIE 9626, Optical Systems Design 2015: Optical Design and Engineering VI, 96260X (23 September 2015); https://doi.org/10.1117/12.2191228
Lens.org Logo
CITATIONS
Cited by 5 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Mirrors

Aspheric lenses

Monochromatic aberrations

Manufacturing

Distortion

Off axis mirrors

Modulation transfer functions

Back to Top