Anti-reflective coating corrrection for ultra-low-reflectance large optics

B. Sassolas; J. Teillon; J. Degallaix; C. Michel; L. Pinard; G. Cagnoli

doi:10.1117/12.2191242

23 September 2015 Anti-reflective coating corrrection for ultra-low-reflectance large optics

B. Sassolas, J. Teillon, J. Degallaix, C. Michel, L. Pinard, G. Cagnoli

Proceedings Volume 9627, Optical Systems Design 2015: Advances in Optical Thin Films V; 96271V (2015) https://doi.org/10.1117/12.2191242
Event: SPIE Optical Systems Design, 2015, Jena, Germany

Abstract

In order to enhance the final performances of complex optical systems it is required to limit the overall wasted reflected light coming from all the different surfaces involved. Ultra-low-reflectance coating becomes even a crucial point for high sensitivity experiments such as gravitational wave detectors where surfaces must have a reflectance lower than 100 ppm. Some tenths of percent is a common value for Anti-Reflective (AR) coating but reflectance below 100 ppm is trickier to achieve. The coating design sensitivity with respect to thickness errors or refractive index error can lead quickly to noncompliant reflectance.

When an AR coating has failed it is very difficult to recover the low reflectance. In theory adding one or two layers could correct the reflectance but it requires knowing exactly the actual coated stack. For large optics (diameter up to 500 mm), we developed a new technique based on reflectance measurements with different polarizations and incidence angles at one wavelength. The measurements were performed in s-polarized and p-polarized light to discriminate between several solutions. Then a correction based on one or two layers is computed in order to decrease the reflectance. The efficiency of this method is demonstrated in the case of a four-layer AR coating designed for zero reflectance at 1064nm and coated onto a 350mm diameter and 200mm thick substrate. The reflectance has decreased from 500ppm to 26ppm thanks to a correcting bilayer.

Citation Download Citation

B. Sassolas, J. Teillon, J. Degallaix, C. Michel, L. Pinard, and G. Cagnoli "Anti-reflective coating corrrection for ultra-low-reflectance large optics", Proc. SPIE 9627, Optical Systems Design 2015: Advances in Optical Thin Films V, 96271V (23 September 2015); https://doi.org/10.1117/12.2191242

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available

Members: $17.00

Non-members: $21.00 ADD TO CART

PROCEEDINGS
6 PAGES

DOWNLOAD PAPER SAVE TO MY LIBRARY

GET CITATION

RIGHTS & PERMISSIONS

Get copyright permission Get copyright permission on Copyright Marketplace

KEYWORDS

Reflectivity

Coating

Antireflective coatings

Crystals

Quartz

Calibration

Refractive index

Show All Keywords

Keywords/Phrases

Search In:

Publication Years