PERSONAL Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.
Different size polishing powder and different pH value ceria slurries were used to polish fused silica glass、K9 glass and Nd-doped glass on pitch plate. Material removal rates (MRR) of glass polished with different size powder and various pH value slurries, and textures of each sample were characterized. The results show that powder size has an effect on glass polishing performance: scratch densities increase with the increase of polishing powder size; surface textures become rougher with the increase of the size of polishing powder. The slurry pH value also affects glass polishing performance: MRR of fused silica glass are lowest under any pH value slurry while Nd-doped glass has the largest MRR; removal rates of all three kinds of glass will rise under both acidic and alkaline condition. Near neutral polishing environment and smaller size powder are useful for the surface polishing process. The results further reveal polishing mechanism and provide the guidance for glass surface process.
Jun Cao,Chaoyang Wei,Shijie Liu,Aihuan Dun,Minghong Yang,Xueke Xu, andJianda Shao
"Polishing performances of different optics with different size powder and different pH value slurries during CMP polishing", Proc. SPIE 9633, Optifab 2015, 96332O (12 October 2015); https://doi.org/10.1117/12.2218455
ACCESS THE FULL ARTICLE
INSTITUTIONAL Select your institution to access the SPIE Digital Library.
PERSONAL Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.
The alert did not successfully save. Please try again later.
Jun Cao, Chaoyang Wei, Shijie Liu, Aihuan Dun, Minghong Yang, Xueke Xu, Jianda Shao, "Polishing performances of different optics with different size powder and different pH value slurries during CMP polishing," Proc. SPIE 9633, Optifab 2015, 96332O (12 October 2015); https://doi.org/10.1117/12.2218455