High-NA optical inspection with its high signal to noise ratio (SNR) can readily detect small defects before they have lithographic impact, thus ensuring reticle quality. However, when inspecting certain aggressive OPC, high-NA inspection can overload on small OPC defects which do not have lithographic impact and thus, should generally be ignored. Whereas, inspecting a reticle as imaged in the wafer plane (low-NA in the reticle plane) will generally ignore such small OPC defects; however, the SNR is often too low for certain defect types to provide the needed defect detection sensitivity to ensure reticle quality. This paper discusses the design and performance of a novel reticle inspection method using high-NA and low-NA dual optical imaging and processing. This method offers the high defect sensitivity of high-NA inspection with the OPC tolerance of low-NA inspection. These two imaging methods are blended together into a seamless inspection mode suitable for aggressive OPC of the 14nm generation and beyond. The test reticles include 14nm logic designs containing aggressive OPC and native defects, as well as a 14 nm test reticle containing relevant programmed defects. Defect lithographic significance is judged using a Zeiss AIMS™ system. |
ACCESS THE FULL ARTICLE
No SPIE Account? Create one
CITATIONS
Cited by 1 patent.
Inspection
Photomasks
Reticles
Defect detection
Semiconducting wafers
Optical proximity correction
Databases