Visible spectral imager for occultation and nightglow (VISION) for the PICASSO Mission

Heikki Saari; Antti Näsilä; Christer Holmlund; Rami Mannila; Ismo Näkki; Harri J. Ojanen; Didier Fussen; Didier Pieroux; Philippe Demoulin; Emmanuel Dekemper; Filip Vanhellemont

doi:10.1117/12.2193557

12 October 2015 Visible spectral imager for occultation and nightglow (VISION) for the PICASSO Mission

Heikki Saari, Antti Näsilä, Christer Holmlund, Rami Mannila, Ismo Näkki, Harri J. Ojanen, Didier Fussen, Didier Pieroux, Philippe Demoulin, Emmanuel Dekemper, Filip Vanhellemont

Author Affiliations +

Proceedings Volume 9639, Sensors, Systems, and Next-Generation Satellites XIX; 96391M (2015) https://doi.org/10.1117/12.2193557
Event: SPIE Remote Sensing, 2015, Toulouse, France

Abstract

PICASSO - A PICo-satellite for Atmospheric and Space Science Observations is an ESA project led by the Belgian Institute for Space Aeronomy, in collaboration with VTT, Clyde Space Ltd. (UK), and the Centre Spatial de Liège (BE). VTT Technical Research Centre of Finland Ltd. will deliver the Visible Spectral Imager for Occultation and Nightglow (VISION) for the PICASSO mission. The VISION targets primarily the observation of the Earth's atmospheric limb during orbital Sun occultation. By assessing the radiation absorption in the Chappuis band for different tangent altitudes, the vertical profile of the ozone is retrieved. A secondary objective is to measure the deformation of the solar disk so that stratospheric and mesospheric temperature profiles are retrieved by inversion of the refractive raytracing problem. Finally, occasional full spectral observations of polar auroras are also foreseen. The VISION design realized with commercial of the shelf (CoTS) parts is described. The VISION instrument is small, lightweight (~500 g), Piezo-actuated Fabry-Perot Interferometer (PFPI) tunable spectral imager operating in the visible and near-infrared (430 – 800 nm). The spectral resolution over the whole wavelength range will be better than 10 nm @ FWHM. VISION has is 2.5° x 2.5° total field of view and it delivers maximum 2048 x 2048 pixel spectral images. The sun image size is around 0.5° i.e. ~500 pixels. To enable fast spectral data image acquisition VISION can be operated with programmable image sizes. VTT has previously developed PFPI tunable filter based AaSI Spectral Imager for the Aalto-1 Finnish CubeSat. In VISION the requirements of the spectral resolution and stability are tighter than in AaSI. Therefore the optimization of the of the PFPI gap control loop for the operating temperature range and vacuum conditions has to be improved. VISION optical, mechanical and electrical design is described.

Citation Download Citation

Heikki Saari, Antti Näsilä, Christer Holmlund, Rami Mannila, Ismo Näkki, Harri J. Ojanen, Didier Fussen, Didier Pieroux, Philippe Demoulin, Emmanuel Dekemper, and Filip Vanhellemont "Visible spectral imager for occultation and nightglow (VISION) for the PICASSO Mission", Proc. SPIE 9639, Sensors, Systems, and Next-Generation Satellites XIX, 96391M (12 October 2015); https://doi.org/10.1117/12.2193557

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available