Mid-infrared quantum cascade laser integrated with distributed Bragg reflector

Hiroyuki Yoshinaga; Jun-ichi Hashimoto; Hiroki Mori; Yukihiro Tsuji; Makoto Murata; Mitsuru Ekawa; Tsukuru Katsuyama

doi:10.1117/12.2212332

13 February 2016 Mid-infrared quantum cascade laser integrated with distributed Bragg reflector

Hiroyuki Yoshinaga, Jun-ichi Hashimoto, Hiroki Mori, Yukihiro Tsuji, Makoto Murata, Mitsuru Ekawa, Tsukuru Katsuyama

Proceedings Volume 9755, Quantum Sensing and Nano Electronics and Photonics XIII; 97552V (2016) https://doi.org/10.1117/12.2212332
Event: SPIE OPTO, 2016, San Francisco, California, United States

Abstract

Quantum cascade lasers (QCLs) are promising as compact light sources in the mid-infrared region. In order to put them into a practical use, their relatively high threshold currents should be reduced. Facet reflectivity increase by distributed Bragg reflector (DBR) is effective for this purpose, but there have been few reports on DBR-integrated QCLs (DBRQCLs). In this paper, we report a successful operation of a DBR-QCL in 7 μm wavelength region. With the fabrication, an n-InP buffer layer, a core region consisting of AlInAs/GaInAs superlattices, an n-InP cladding layer, and an n-GaInAs contact layer were successively grown on an n-InP substrate using OMVPE in the first growth. Then, the wafer was processed into a mesa-stripe, and it was buried by an Fe-doped InP current-blocking layer to form a buriedheterostructure (BH) waveguide. After that, a DBR in which semiconductor-walls and air-gaps were alternately arranged was formed at the front or end of the cavity by dry-etching the epitaxial layers of the air-gap regions, and thus a DBRQCL was fabricated. A DBR-QCL chip (Mesa-width:10 μm, Cavity-legth:2 mm) which had a DBR-structure consisting of 1 pair of a 3λ/4-thick semiconductor-wall/3λ/4-thick air-gap at the front end and a high reflective facet at the rear end oscillated successfully under continuous-wave condition at 15°C. This is the first report on the InP-based DBR-QCL to our knowledge. The facet reflectivity at the DBR was 66%, which was about two times larger than that of the cleaved facet. This result clearly shows that the DBR-structure is effective for threshold current reduction of QCL.

Citation Download Citation

Hiroyuki Yoshinaga, Jun-ichi Hashimoto, Hiroki Mori, Yukihiro Tsuji, Makoto Murata, Mitsuru Ekawa, and Tsukuru Katsuyama "Mid-infrared quantum cascade laser integrated with distributed Bragg reflector", Proc. SPIE 9755, Quantum Sensing and Nano Electronics and Photonics XIII, 97552V (13 February 2016); https://doi.org/10.1117/12.2212332

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available