Paper
27 April 2016 LD-pumped acousto-optical Q-switched burst-mode Nd:YAG laser
Author Affiliations +
Abstract
A high-repetition-rate, high-peak-power burst-mode laser for laser-based measurement applications is presented by using a master oscillator power amplifier structure. An laser diode arrays (LDA) side-pumped Nd:YAG acousto-optical (A-O) Q-switched laser serves as the master oscillator. Under pulsed pumping, pulse trains with 2-25 pulses are obtained when the repetition rate changes from 10 kHz to 100 kHz. The maximum pulse burst energy of 31.2 mJ is achieved in the A-O Q-switched pulse burst laser oscillator at 10 kHz. Two LDA side pumped Nd:YAG modules are employed in the amplification stage. After the amplification, the pulse burst energy at 10 kHz reaches ~170 mJ with a single pulse energy of 85.2 mJ and a pulse width of 14.5 ns, generating a peak power of 6.1 MW. At 100 kHz, the total burst energy reaches 220 mJ with a single pulse energy of 8.8 mJ in the pulse burst laser system.
© (2016) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Hu Pan, Renpeng Yan, Xudong Li, Yufei Ma, Xin Yu, and Deying Chen "LD-pumped acousto-optical Q-switched burst-mode Nd:YAG laser", Proc. SPIE 9893, Laser Sources and Applications III, 98930X (27 April 2016); https://doi.org/10.1117/12.2225884
Lens.org Logo
CITATIONS
Cited by 3 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Pulsed laser operation

Nd:YAG lasers

Oscillators

Q switched lasers

Laser applications

Optical amplifiers

Energy efficiency

RELATED CONTENT

200W output power at 10ps from a scalable Z slab...
Proceedings of SPIE (February 28 2014)
The study of 3.2 mJ picosecond regenerative amplifier at 2...
Proceedings of SPIE (December 09 2014)
A 2.2J all diode pumped Nd YAG burst mode laser...
Proceedings of SPIE (November 15 2018)

Back to Top