1 March 2000 Interphase in plasma-deposited silicon nitride optical films on polycarbonate: in situ ellipsometric characterization
Adam Bergeron, Daniel Poitras, Ludvik Martinu
Author Affiliations +
Plasma-enhanced chemical vapor deposition is very attractive for the fabrication of optical filters on plastic substrates. We found, using ex situ and in situ spectroellipsometric analysis, that plasma deposition of silicon nitride as a high-refractive-index material, on bare and plasma-pretreated polycarbonate (PC) substrates, gives rise to the formation of a 50- to 100-nm-thick interfacial region (or interphase). We show that plasma pretreatment can reduce the thickness of this interphase by 50% from that obtained with deposition on untreated PC, possibly due to interface stabilization. An optical model based on real-time in situ measurements is proposed to describe the interphase refractive index profile. This model is fully supported by complementary crosssectional transmission-electron-microscopy observations. Important consequences for the mechanical performance (adhesion and scratch resistance) and optical design of optical coatings on plastics are discussed.
Adam Bergeron, Daniel Poitras, and Ludvik Martinu "Interphase in plasma-deposited silicon nitride optical films on polycarbonate: in situ ellipsometric characterization," Optical Engineering 39(3), (1 March 2000). https://doi.org/10.1117/1.602433
Published: 1 March 2000
Lens.org Logo
CITATIONS
Cited by 9 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Plasma

Refractive index

In situ metrology

Data modeling

Silicon

Medium wave

Optical coatings

Back to Top