1 January 2006 Transmission-electron-microscopy observation of dislocation networks of oxide vertical-cavity surface-emitting lasers
Toru Itakura, Yoshihiko Seyama, Taichi Terada, Koshi Ueda
Author Affiliations +
Abstract
Oxide vertical-cavity surface-emitting lasers (VCSELs) are widely used in high-speed fiber optical communications. Burn-in tests are run on oxide VCSELs to weed out defective devices, thereby fulfilling the related reliability requirements. Nevertheless, some oxide VCSELs fail in the field. Oxide VCSELs that failed in the field were examined with transmission electron microscopy (TEM). Besides cross-sectional views, plan views of the entire active region were observed. Development of a dislocation network in the active region was found in all samples, and that is the cause of the failures. The Burgers vectors of these dislocations are parallel to [101]. Although the trigger of the dislocations has not been identified, electrostatic discharge (ESD) does not cause the dislocation in our investigated devices, since no ESD-damaged region was found. Strain and/or crystal defects introduced during VCSEL fabrication are considered to be the cause.
©(2006) Society of Photo-Optical Instrumentation Engineers (SPIE)
Toru Itakura, Yoshihiko Seyama, Taichi Terada, and Koshi Ueda "Transmission-electron-microscopy observation of dislocation networks of oxide vertical-cavity surface-emitting lasers," Optical Engineering 45(1), 014201 (1 January 2006). https://doi.org/10.1117/1.2150232
Published: 1 January 2006
Lens.org Logo
CITATIONS
Cited by 1 scholarly publication.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Vertical cavity surface emitting lasers

Oxides

Transmission electron microscopy

Fiber optic communications

Reliability

Crystals

Etching

RELATED CONTENT

VCSEL reliability research at Gore Photonics
Proceedings of SPIE (June 04 2002)
Reduction of low-level current leakage in CMOS devices
Proceedings of SPIE (September 14 1994)

Back to Top