Presentation + Paper
15 February 2018 High-power single-pass pumped diamond Raman oscillator
Author Affiliations +
Abstract
We present our recent advances on power scaling of a high-power single-pass pumped CVD-diamond Raman oscillator at 1.2 μm. The single pass scheme reduced feedback to the high gain fiber amplifier, which pumps the oscillator. The Yb-doped multi-stage fiber amplifier itself enables up to 1 kW output power at a narrow linewidth of 0.16 nm. We operate this laser in quasi-cw mode at 10% duty cycle and on-time (pulse) duration of 10 ms. With a maximum conversion efficiency of 39%, a maximum steady-state output power of 380 W and diffraction limited beam quality was achieved.
Conference Presentation
© (2018) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Matthias Heinzig, Till Walbaum, Robert J. Williams, Ondrej Kitzler, Richard P. Mildren, Thomas Schreiber, Ramona Eberhardt, and Andreas Tünnermann "High-power single-pass pumped diamond Raman oscillator ", Proc. SPIE 10511, Solid State Lasers XXVII: Technology and Devices, 105111K (15 February 2018); https://doi.org/10.1117/12.2287773
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Diamond

Raman spectroscopy

Oscillators

Crystals

Mirrors

Fiber amplifiers

Coating

RELATED CONTENT

Ho3+ LLF MOPA pumped RISTRA ZGP OPO at 3 5...
Proceedings of SPIE (March 12 2013)
60W Ho:YLF oscillator-amplifier system
Proceedings of SPIE (February 20 2015)
High-power single-pass pumped diamond Raman oscillator
Proceedings of SPIE (February 26 2018)
High power Raman diamond laser
Proceedings of SPIE (February 15 2011)
Excitation of individual Raman Stokes lines of up to ninth...
Proceedings of SPIE (February 17 2010)
23 watt 77% efficient CW OPO pumped by a fiber...
Proceedings of SPIE (February 17 2010)

Back to Top