Presentation + Paper
14 September 2018 Vis-NIR spectral flatness improvement for Laser-Driven Light Sources (LDLS)
X. Ye, A. Cutler, M. Besen, H. Zhu
Author Affiliations +
Abstract
The demand for high brightness, stable, long-life and broadband light sources has been rising continuously in advanced applications for semiconductor metrology, sensor calibrations, and life sciences imaging. Laser-Driven Light Sources (LDLS™) are capable of delivering super-high brightness and stable radiation over long lifetimes. LDLS sources use high power diode lasers to energize high-intensity xenon (Xe) plasma which produces broadband radiation from 170nm to 2400nm. The LDLS spectrum has several spectral peaks located near 826nm, 885nm, and 920nm, similar to regular Xe short arc lamps. Those peaks, when compared with lower emission wavelengths, can reduce the dynamic range of broadband spectral measurements. In this paper, the application of a spectral flattening filter for LDLS sources is presented. With optimized coupling optical design, the output power and spectral performance for the LDLS under different fiber coupling conditions have been compared and analyzed. Measurement results show the coupled flux could reach 83mW with a 600μm diameter fiber, and the high Xe peaks near 826nm, 885nm, and 920nm have been suppressed successfully.
Conference Presentation
© (2018) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
X. Ye, A. Cutler, M. Besen, and H. Zhu "Vis-NIR spectral flatness improvement for Laser-Driven Light Sources (LDLS)", Proc. SPIE 10758, Nonimaging Optics: Efficient Design for Illumination and Solar Concentration XV, 107580N (14 September 2018); https://doi.org/10.1117/12.2321647
Lens.org Logo
CITATIONS
Cited by 1 scholarly publication and 1 patent.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Xenon

Plasma

Optical filters

Light sources

Mirrors

Lamps

Signal to noise ratio

Back to Top