Poster + Paper
7 June 2024 Active thermography non-destructive inspection of a damaged artwork with a complex shape
Author Affiliations +
Conference Poster
Abstract
This study reports the results of active thermography non-destructive inspection of an ancient artwork. The artwork was decorated with metal ornaments, realized by hands from specialized craftsmen. However, it was seriously damaged by a catastrophic event based on repeated vibrations. The condition of the ancient artwork was evaluated from thermal data recorded during and after a long pulse heating. In this study, the evaluations were performed using not only the raw thermograms but also the results of three post-processing algorithms, namely: pulsed phase thermography (PPT), thermographic signal reconstruction (TSR), and principal component thermography (PCT). Comparison of the results based on signal-to-noise ratio (SNR) calculations showed that TSR was the most effective technique for detecting defects, and PCT was also effective for the detection of crack-shaped defects. In contrast, PPT seems not suitable for inspection of objects with a complex shape.
(2024) Published by SPIE. Downloading of the abstract is permitted for personal use only.
Masashi Ishikawa, Stefano Sfarra, and Panagiotis Theodorakeas "Active thermography non-destructive inspection of a damaged artwork with a complex shape", Proc. SPIE 13047, Thermosense: Thermal Infrared Applications XLVI, 1304717 (7 June 2024); https://doi.org/10.1117/12.3013386
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Inspection

Signal to noise ratio

Thermography

Defect detection

Nondestructive evaluation

Infrared radiation

Signal processing

Back to Top