Paper
27 May 1996 Absorption and laser damage threshold studies of ion-assisted pulsed-laser-deposited oxide films
Guenter Reisse, Steffen Weissmantel, Bernd Keiper, Bernhard Steiger, Ulrike Broulik
Author Affiliations +
Abstract
The laterally resolved absorption and the laser damage thresholds at 1.06 micrometers wavelength of yttria and hafnia films prepared by pulsed laser deposition with oxygen ion bombardment of the growing films were investigated. Depending on the laser and ion beam parameters films with low average absorption can be prepared by that method. Consequently, high predominantly intrinsic absorption induced laser damage thresholds D1 comparable with those of continuously evaporated films can be prepared. The more defect induced laser damage thresholds D0, however, are largely determined by a certain number of micron- sized particulates embedded inside the films. Their number can be reduced by optimizing the laser pulse power density and the laser beam cross-section on the target, while their influence on laser damage thresholds can be reduced by increasing the ratio of oxygen ion bombardment to growth rate.
© (1996) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Guenter Reisse, Steffen Weissmantel, Bernd Keiper, Bernhard Steiger, and Ulrike Broulik "Absorption and laser damage threshold studies of ion-assisted pulsed-laser-deposited oxide films", Proc. SPIE 2714, 27th Annual Boulder Damage Symposium: Laser-Induced Damage in Optical Materials: 1995, (27 May 1996); https://doi.org/10.1117/12.240375
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Ions

Absorption

Pulsed laser operation

Oxygen

Laser damage threshold

Refractive index

Laser ablation

Back to Top