Paper
12 April 2001 Use of high-power dye laser beams during long periods induces chemical vapor deposition
Laurent Bruel, Pierre Delmas
Author Affiliations +
Abstract
The use of high power dye laser beams during long periods is difficult because the performances of the optical components are decreasing with time. To understand this phenomenon, a set-up for research of experimental conditions that can minimize this dramatic trend has been built. After being irradiated by a laser beam of some kW/cm2, the optical components are locally covered by droplets. The size of the droplets depends on experimental conditions. They can be eliminated by cleaning. The high absorption of the deposits (200 ppm to 1000 ppm) leads us to search experimental conditions to limit the layer deposition speed. XPS measurements prove that the contamination is merely made up of organic compounds and hydrogenated carbon. The experiments show that a clean room environment under a controlled airflow is not sufficient to assure a very slow deposition. Vacuum from 10-2 to 10-6 mbar is even worse than room conditions and only the presence of oxygen can limit or eliminate these deposits.
© (2001) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Laurent Bruel and Pierre Delmas "Use of high-power dye laser beams during long periods induces chemical vapor deposition", Proc. SPIE 4347, Laser-Induced Damage in Optical Materials: 2000, (12 April 2001); https://doi.org/10.1117/12.425035
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Contamination

Absorption

Coating

Oxygen

Chemical analysis

Dye lasers

Optical components

RELATED CONTENT

Improved EUV filter transmission with plasma cleaning
Proceedings of SPIE (July 29 2010)
Development of pellicle for ArF excimer laser
Proceedings of SPIE (September 01 1998)
Properties of rf magnetron sputtered C and C N thin...
Proceedings of SPIE (November 04 1994)
Environmental effects on optical component aging
Proceedings of SPIE (May 30 2003)

Back to Top