Paper
18 June 2002 Bimetallic thermal activated films for microfabrication, photomasks, and data storage
Author Affiliations +
Abstract
Bimetallic thermal resist Bi/In has shown many applications in the areas of microfabrication, photomasks and data storage. Optical modeling shows that this class of thermal resist is wavelength invariant, and Bi/In can perform even better at 13.4 nm than at 248 nm due to the increase of absorption and the reduction of reflection. Images were successfully made on Bi/In films with both proximity and projection exposures with Nd:YAG laser running at 2nd harmonic wavelength. A new kind of developing solution used at room temperature was found to be more effective in descumming than nitric acetic acid solution. Both have the etching selectively of unexposed area to exposed areas > 60:1. Developed Bi/In resists shows good conductivity, which can be used as both a metal plating masking and seeding layer, 2 to 10 micrometers wide CU and Ni lines and squares were successfully plated on the developed Bi/In patterns on glass slides and silicon wafers. Shelf test shows that the properties of Bi/In film do not change after being kept in a humid temperature-lifted environment for 10 days. Large optical transmission changes indicate Bi/In can be used for direct-write photomasks and data storage media. Heat- treatment enhances the OD exposed/unexposed OD change.
© (2002) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Richard Yuqiang Tu, Glenn H. Chapman, and Marinko V. Sarunic "Bimetallic thermal activated films for microfabrication, photomasks, and data storage", Proc. SPIE 4637, Photon Processing in Microelectronics and Photonics, (18 June 2002); https://doi.org/10.1117/12.470639
Lens.org Logo
CITATIONS
Cited by 10 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Absorption

Copper

Bismuth

Photomasks

Plating

Etching

Nickel

Back to Top