Paper
21 September 2006 Thermal design of high-power LED package and system
Author Affiliations +
Proceedings Volume 6355, Advanced LEDs for Solid State Lighting; 635509 (2006) https://doi.org/10.1117/12.690928
Event: Asia-Pacific Optical Communications, 2006, Gwangju, South Korea
Abstract
In this paper we present thermal analysis of three kinds of ceramic package designs for high power LEDs and thermal characterization of high power LED array system. The analysis was made by transient thermal measurement and thermal simulation using the finite volume method (FVM). For the package design, thermal behaviors, as are described in thermal resistance, of the three packaging designs were compared and evaluated as functions of bulk thermal resistance, spreading resistance, and surface roughness. The deviation between the simulated results and measured data were attributed to the different surface roughness in the interfaces between the packaging components. For the system design, the emphasis is placed upon the investigation of junction temperature rise of LED array for a limited range of boundary conditions which include design effect of heat pipe, convection condition, and ambient temperature. It was found out that the measured junction temperatures and thermal resistance of LED array are increased with the input power and ambient temperature and decreased with the air velocity. An analytical thermal model analogous with an equivalent parallel circuit system was proposed and was verified by comparison with experimental data.
© (2006) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Moo Whan Shin "Thermal design of high-power LED package and system", Proc. SPIE 6355, Advanced LEDs for Solid State Lighting, 635509 (21 September 2006); https://doi.org/10.1117/12.690928
Lens.org Logo
CITATIONS
Cited by 40 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Light emitting diodes

Resistance

Temperature metrology

Thermal effects

Convection

Ceramics

Silver

RELATED CONTENT


Back to Top