Recent developments in very long wave and shortwave infrared detection for space applications

Andrew Ashcroft; Chris Jones; Les Hipwood; Ian Baker; Peter Thorne; Nick Shorrocks; Peter Knowles; Harald Weller

doi:10.1117/12.800099

9 October 2008 Recent developments in very long wave and shortwave infrared detection for space applications

Andrew Ashcroft, Chris Jones, Les Hipwood, Ian Baker, Peter Thorne, Nick Shorrocks, Peter Knowles, Harald Weller

Proceedings Volume 7106, Sensors, Systems, and Next-Generation Satellites XII; 71061I (2008) https://doi.org/10.1117/12.800099
Event: SPIE Remote Sensing, 2008, Cardiff, Wales, United Kingdom

Abstract

There is considerable interest in sensors which are optimised for detecting infrared radiation outside the normal thermal bands (3-12μm). This paper presents the development of photodiode arrays in Hg_1-xCd_xTe (MCT) that are sensitive in the very long wave (VLW) band to 14μm or in the visible and SWIR band below 2.5μm wavelength. The VLW arrays are heterostructure diodes fabricated from MCT grown by Metal Organic Vapour Phase Epitaxy (MOVPE). These are staring, focal plane arrays of mesa-diodes bump bonded to silicon read-out circuits. Measurements are presented demonstrating state-of-the-art performance over the temperature range 55-80K, for detectors with a cut-off wavelength of up to 14μm (at 77K). The SWIR/Visible detectors consist of an array of loophole photodiodes fabricated using MCT grown by Liquid Phase Epitaxy (LPE). The technology is suited to imaging LIDAR, NIR/Visible imaging, spectroscopy or hyperspectral applications. The diodes operate as avalanche photodiodes (APDs) which provides near-ideal gain in the pixel. Measurements are presented demonstrating state-of-the-art performance in the range 80K-200K from arrays with a cut-off below 2.5μm. Supporting technologies are also discussed. Silicon circuitry must be implemented in the SWIR and VLW bands that is appropriate to avalanche operation or copes with the low photon flux or low photodiode impedance. Trade-offs between conventional direct injection (DI), buffered direct injection (BDI), pixel capacitive transimpedance amplifier (CTIA) and source-follower per detector (SFPD) are presented. Work is in progress to increase the MOVPE wafer size to 6" which will enable large area arrays to be produced in the SW, MW, LW and VLW bands.

Citation Download Citation

Andrew Ashcroft, Chris Jones, Les Hipwood, Ian Baker, Peter Thorne, Nick Shorrocks, Peter Knowles, and Harald Weller "Recent developments in very long wave and shortwave infrared detection for space applications", Proc. SPIE 7106, Sensors, Systems, and Next-Generation Satellites XII, 71061I (9 October 2008); https://doi.org/10.1117/12.800099

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available

Members: $17.00

Non-members: $21.00 ADD TO CART

PROCEEDINGS
11 PAGES

DOWNLOAD PAPER SAVE TO MY LIBRARY

GET CITATION

RIGHTS & PERMISSIONS

Get copyright permission Get copyright permission on Copyright Marketplace

KEYWORDS

Diodes

Sensors

Avalanche photodetectors

Amplifiers

Readout integrated circuits

Resistance

Capacitance

Show All Keywords

Keywords/Phrases

Search In:

Publication Years