Foot angle determination using conductive polymer sensors

L. M. Castano; A. E. Winkelmann; A. B. Flatau

doi:10.1117/12.847679

31 March 2010 Foot angle determination using conductive polymer sensors

L. M. Castano, A. E. Winkelmann, A. B. Flatau

Proceedings Volume 7647, Sensors and Smart Structures Technologies for Civil, Mechanical, and Aerospace Systems 2010; 76470Z (2010) https://doi.org/10.1117/12.847679
Event: SPIE Smart Structures and Materials + Nondestructive Evaluation and Health Monitoring, 2010, San Diego, California, United States

Abstract

A study was carried out to assess the possibility of monitoring of joint angles, foot posture and foot motion through the use of conductive polymer sensors. The sensors are composed of a carbon polymer coating on an elastic fabric and they behave like strain gauges. A mechanically driven hinge was used to simulate joint motion by generating an angle change between its wings. A sensor strip was clamped longitudinally across the hinge in order for it to stretch when the angle between the wings increases. An electrogoniometer was used to monitor the angle spanned by the two wings of the hinge. Series of simultaneous measurements of angle and resistance were conducted at different speeds. Results indicate that a unique rate of change of voltage can be assigned to a specific angular velocity. This idea allows the tabulation of a database of voltages and time derivatives of voltages with corresponding angles and angular velocities. Angular velocity information was obtained by computing the derivatives of sensor output voltages in real time and comparing both voltage and their time derivatives to values in the database, with linear interpolation used as necessary. Angular displacement was then obtained by numerically integrating velocity information. Three carbon sensors were then applied on socks and were placed on different locations of maximum strain on the foot. Wireless data transmission was added in order to enable unhindered foot motion for future applications.

Citation Download Citation

L. M. Castano, A. E. Winkelmann, and A. B. Flatau "Foot angle determination using conductive polymer sensors", Proc. SPIE 7647, Sensors and Smart Structures Technologies for Civil, Mechanical, and Aerospace Systems 2010, 76470Z (31 March 2010); https://doi.org/10.1117/12.847679

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available