Characterization and application of 3D-printed phantoms for biophotonic imaging

Jianting Wang; James Coburn; Chia-Pin Liang; Nicholas Woolsey; Du Le; Jessica Ramella-Roman; Yu Chen; Joshua Pfefer

doi:10.1117/12.2018285

31 May 2013 Characterization and application of 3D-printed phantoms for biophotonic imaging

Jianting Wang, James Coburn, Chia-Pin Liang, Nicholas Woolsey, Du Le, Jessica Ramella-Roman, Yu Chen, Joshua Pfefer

Proceedings Volume 8719, Smart Biomedical and Physiological Sensor Technology X; 87190Y (2013) https://doi.org/10.1117/12.2018285
Event: SPIE Defense, Security, and Sensing, 2013, Baltimore, Maryland, United States

Abstract

The emerging technique of three-dimensional (3D) printing provides a simple, fast, and flexible way to fabricate structures with arbitrary spatial features and may prove useful in the development of standardized, phantom-based performance test methods for biophotonic imaging. Acrylonitrile Butadiene Styrene (ABS) is commonly used in the printing process, given its low cost and strength. In this study, we evaluate 3D printing as an approach for fabricating biologically-relevant optical phantoms for hyperspectral reflectance imaging (HRI). The initial phase of this work involved characterization of absorption and scattering coefficients using spectrophotometry. The morphology of phantoms incorporating vessel-like channels with diameters on the order of hundreds of microns was examined by microscopy and OCT. A near-infrared absorbing dye was injected into channels located at a range of depths within the phantom and imaged with a near-infrared HRI system (650-1100 nm). ABS was found to have scattering coefficients comparable to biological tissue and low absorption throughout much of the visible and infrared range. Channels with dimensions on the order of the resolution limit of the 3D printer (~0.2 mm) exhibited pixelation effects as well as a degree of distortion along their edges. Furthermore, phantom porosity sometimes resulted in leakage from channel regions. Contrast-enhanced channel visualization with HRI was possible to a depth of nearly 1 mm – a level similar to that seen previously in biological tissue. Overall, our ABS phantoms demonstrated a high level of optical similarity to biological tissue. While limitations in printer resolution, matrix homogeneity and optical property tunability remain challenging, 3D printed phantoms have significant promise as samples for objective, quantitative evaluation of performance for biophotonic imaging modalities such as HRI.

Citation Download Citation

Jianting Wang, James Coburn, Chia-Pin Liang, Nicholas Woolsey, Du Le, Jessica Ramella-Roman, Yu Chen, and Joshua Pfefer "Characterization and application of 3D-printed phantoms for biophotonic imaging", Proc. SPIE 8719, Smart Biomedical and Physiological Sensor Technology X, 87190Y (31 May 2013); https://doi.org/10.1117/12.2018285

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available