Initial testing of a 3D printed perfusion phantom using digital subtraction angiography

Rachel P. Wood; Parag Khobragade; Leslie Ying; Kenneth Snyder; David Wack; Daniel R. Bednarek; Stephen Rudin; Ciprian N. Ionita

doi:10.1117/12.2081471

17 March 2015 Initial testing of a 3D printed perfusion phantom using digital subtraction angiography

Rachel P. Wood, Parag Khobragade, Leslie Ying, Kenneth Snyder, David Wack, Daniel R. Bednarek, Stephen Rudin, Ciprian N. Ionita

Author Affiliations +

Proceedings Volume 9417, Medical Imaging 2015: Biomedical Applications in Molecular, Structural, and Functional Imaging; 94170V (2015) https://doi.org/10.1117/12.2081471
Event: SPIE Medical Imaging, 2015, Orlando, Florida, United States

Abstract

Perfusion imaging is the most applied modality for the assessment of acute stroke. Parameters such as Cerebral Blood Flow (CBF), Cerebral Blood volume (CBV) and Mean Transit Time (MTT) are used to distinguish the tissue infarct core and ischemic penumbra. Due to lack of standardization these parameters vary significantly between vendors and software even when provided with the same data set. There is a critical need to standardize the systems and make them more reliable. We have designed a uniform phantom to test and verify the perfusion systems. We implemented a flow loop with different flow rates (250, 300, 350 ml/min) and injected the same amount of contrast. The images of the phantom were acquired using a Digital Angiographic system. Since this phantom is uniform, projection images obtained using DSA is sufficient for initial validation. To validate the phantom we measured the contrast concentration at three regions of interest (arterial input, venous output, perfused area) and derived time density curves (TDC). We then calculated the maximum slope, area under the TDCs and flow. The maximum slope calculations were linearly increasing with increase in flow rate, the area under the curve decreases with increase in flow rate. There was 25% error between the calculated flow and measured flow. The derived TDCs were clinically relevant and the calculated flow, maximum slope and areas under the curve were sensitive to the measured flow. We have created a systematic way to calibrate existing perfusion systems and assess their reliability.

Citation Download Citation

Rachel P. Wood, Parag Khobragade, Leslie Ying, Kenneth Snyder, David Wack, Daniel R. Bednarek, Stephen Rudin, and Ciprian N. Ionita "Initial testing of a 3D printed perfusion phantom using digital subtraction angiography", Proc. SPIE 9417, Medical Imaging 2015: Biomedical Applications in Molecular, Structural, and Functional Imaging, 94170V (17 March 2015); https://doi.org/10.1117/12.2081471

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available