Dr. Ahmet Camlica Profile

Dr. Ahmet Camlica

at Univ of Waterloo

SPIE Involvement:

Author

Publications (4)

Proceedings Article | 4 April 2022 Presentation

Energy resolution of amorphous selenium detectors: conventional vs unipolar charge sensing

Ahmet Camlica, Denny Lee, Hyunsuk Jang, M. Zahangir Kabir, Karim Karim

Proceedings Volume PC12031, PC120310G (2022) https://doi.org/10.1117/12.2613030

KEYWORDS: Sensors, Selenium, Photon counting, Electric field sensors, Spatial resolution, Time metrology, Surgery, Spectroscopy, Spectroscopes, Single photon

Read Abstract +

Proceedings Article | 16 March 2020 Paper

Performance of amorphous selenium-based unipolar charge sensing detector for photon counting x-ray imaging

Ahmet Camlica, Denny Lee, Hyunsuk Jang, Salman Arnab, Yuan Fang, M. Kabir, Karim Karim

Proceedings Volume 11312, 113120G (2020) https://doi.org/10.1117/12.2550318

KEYWORDS: Sensors, Electrodes, Signal detection, Photon counting, Selenium, Photoresistors, Electric field sensors, Near field, X-ray imaging, Photodetectors

Read Abstract +

Proceedings Article | 12 March 2018 Paper

Increased temporal resolution of amorphous selenium detector using preferential charge sensing approach

Ahmet Camlica, Denny Lee, Karim Karim

Proceedings Volume 10573, 105735W (2018) https://doi.org/10.1117/12.2293889

KEYWORDS: Sensors, Electrodes, X-rays, Selenium, Electrons, Spatial resolution, Real time imaging, Temporal resolution, Photoresistors, X-ray detectors

Read Abstract +

Amorphous selenium (a-Se) is a direct conversion photoconductor capable of very high spatial resolution that can enable early detection of small and subtle lesions. A-Se also offers cost effective and reliable coupling to large area readout circuitry. Currently, the highest performance commercial flat panel detectors used for mammography are based on a-Se technology. However, this inherent spatial resolution has not been leveraged for real-time imaging applications, e.g. micro- angiography for imaging fine brain vessels that requires spatial resolution approaching 20 lp/mm, which is achievable with selenium technology. The challenge is that a-Se detectors suffer from memory artifacts such as lag that limits the frame rate of the X-ray imager. The frame rate reduction is attributed primarily to lag, which manifests itself as an increased dark conductivity after an X-ray exposure. Increased lag degrades the temporal response of the detector and makes a-Se photoconductor impractical for real-time imaging. Furthermore, high ionization energy required for electron-hole pair creation with a-Se limits the sensitivity of detector for a given X-ray dose, achieving a quantum noise limited system become a challenge. In this study, we investigate preferential sensing of those charge carriers having a higher mobility, i.e. holes for a-Se, to improve the temporal response of a-Se detectors for real-time imaging. A new preferential charge sensing detector with a field shaping internal grid, called Multi Pixel Proportional Counter, is fabricated and tested under the typical clinical usage conditions similar to that of fluoroscopy. The fabricated detector offers high frame rate and low noise imaging through avalanche gain. Conventional a-Se detectors are also fabricated for comparison purposes. Experimental results show that image lag as low as 1% can be achieved with the new structure with an internal grid while the conventional detector exhibits higher lag around 5%.

Proceedings Article | 9 March 2018 Paper

A novel radiation imaging detector with proportional charge gain

Denny Lee, Hyunsuk Jang, Ahmet Camlica, Karim Karim

Proceedings Volume 10573, 105735X (2018) https://doi.org/10.1117/12.2293429

KEYWORDS: Electrodes, Sensors, Selenium, Dielectrics, Interfaces, Image sensors, Ionization, Electrons, Image processing, Digital imaging

Read Abstract +

View contact details

UPDATE YOUR PROFILE

Is this your profile? Update it now.

Sign into your SPIE.org account

Don’t have a profile and want one?

Create an account on SPIE.org

Keywords/Phrases

Search In:

Publication Years