KEYWORDS: Color and brightness control algorithms, Color management, 3D displays, Glasses, Displays, Stereoscopic displays, 3D vision, Light sources, Laser based displays, 3D image processing
Three-dimensional (3D) display is a very attractive research direction, and have potential in many areas. The cutting-edge autostereoscopic display technology allows glasses-free experience, but still be limited in the lab because of the small eye space and high cross-talk. The only commercially available technology is still polarization-interlaced stereoscopic display. The disadvantages are the bulk-cost of the polarization module, low-light efficiency, and the high crosstalk. Besides, the color gamut in two-dimensional (2D) display is very important to display systems, which represents the color rending ability, and at present limited by three primaries. Herein, we demonstrate a six-primary-laser projection system compatible with 3D and 2D display, achieve great 3D viewing experience with crosstalk lower than 1% by time-multiplexed stereoscopic display technology and spectral coating glasses. In addition, we study the volume color gamut of this system in 2D working mode. The color gamut is greatly increase to an amazing 178.4% NTSC, owing to the application of multiprimary color and narrow spectral line-width laser source. This system is also provide the possibility for us to study the color gamut involving binocular fusion in 3D working mode in future.
Color gamut is an important parameter for display system. Wider gamut means that the system can display more colors. In this article, we designed an experiment to measure the color discrimination ability of human eyes in a certain range under different light sources such as LCD, LED, OLED and laser display, which has different center wavelength and spectrum-width. In our experiment, a Xenon lamp projector and a RGB laser projector were used to run the testing program. Eight volunteers` results showed that the gamut of RGB laser display is 49.48% larger than that of ordinary Xenon lamp display, and the standard deviation of the result was 8.7%.
Many kinds of display technology such as LCD, OLED, quantum dot and laser display are developing rapidly. The final purpose of display technology is to achieve wider color gamut. Traditional method uses planar chromaticity diagram in CIEXYZ space to describe color gamut. This method did not use uniform color space and cannot deal with the situation of display systems with four or more primaries. In our previous work, we have already established a theory based on Macadam’s theory to calculate the stereoscopic color gamut for RGB laser display systems. In this letter, we extend this theory to display systems with four or more primaries. By using our algorithm, we calculate the stereoscopic color gamut of multi-primary display system. We set a four primary display system as an example. The center wavelength of the primary are set as 467nm, 520nm, 532nm and 630nm, white point is set as D65(x=0.3127, y=0.3290), and color gamut has been calculated in CIELAB color space. Results show that when the ratio of the intensity of four primary is 1.0000:0.7490: 0.4316:1.5000, the largest gamut is obtained, whose value is 2.1030*106. These results can be used in engineering to optimize the intensity of the primaries in four primaries display systems.
Access to the requested content is limited to institutions that have purchased or subscribe to SPIE eBooks.
You are receiving this notice because your organization may not have SPIE eBooks access.*
*Shibboleth/Open Athens users─please
sign in
to access your institution's subscriptions.
To obtain this item, you may purchase the complete book in print or electronic format on
SPIE.org.
INSTITUTIONAL Select your institution to access the SPIE Digital Library.
PERSONAL Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.