The surface-bonding method of the fiber Bragg grating(FBG) sensor is easier to handle than embedding method. However surface bonded FBG sensors have the limitation of the signal characteristics being affected by the bonding layer. In this study, the effects of the bonding length on the surface installed FBG sensor signal characteristics under various load types were empirically investigated. To evaluate the stability of the signal characteristics of the FBG sensors, the strain transfer rate and the multiple peaks ratio of the reflected spectrum were calculated and compared. From the experimental results, the strain transfer ratio and multiple peaks ratio varied because of the different strain gradients formed depending on the applied load type. Therefore, it was found that the effective bonding length for respective load types need to be determined to get a stable signal from the surface bonded FBG sensors.
A low velocity impact onto a composite structure can result in the occurrence of barely visible impact damage (BVID), which is difficult to detect. Therefore, the low velocity impact monitoring of composite structures is highly desirable for impact detection and localization. In this paper, low velocity impacts on a composite wing under a simulated wing loading condition were monitored using six multiplexed fiber Bragg grating (FBG) sensors and localized using error outlier based impact localization algorithm. The impact response signals from the FBG sensors were sampled at a rate of 100 kHz using high-speed interrogator. The impacts were localized with an average error of 18.4 mm.
Composite materials provide many advantages over conventional materials including metals, especially for space applications. However, composites have failure modes that are complex and difficult to identify, and various cracks and delamination are predominantly difficult to detect visually. In this regard, an effective method of monitoring the integrity of composite materials and structures exposed to hazardous space environments is necessary to ensure the long-term reliability of composite materials in aerospace applications. FBG sensors are advantageous for space applications due to their immunity to various environments. In this study, FBG sensors were used to investigate LEO environment exposure monitoring of CFRP.
Applications of composite materials in aerospace structures is increasing due to the outstanding properties, however, monitoring such composite structures exposed to harsh environments is still a posing issue. Low Earth orbit space structures are exposed to property degradation and damage from high-degree vacuum, ultraviolet radiation, thermal cycling, and atomic oxygen attack which are detrimental to composite materials. In this study, FBG sensors for embedding in CFRP composite plates in different thickness locations to provide health and damage monitoring of the material exposed to such environments regarding the overall health of the material with a focus on the exposed surface are explored in comparison to conventional FBG sensors.
Access to the requested content is limited to institutions that have purchased or subscribe to SPIE eBooks.
You are receiving this notice because your organization may not have SPIE eBooks access.*
*Shibboleth/Open Athens users─please
sign in
to access your institution's subscriptions.
To obtain this item, you may purchase the complete book in print or electronic format on
SPIE.org.
INSTITUTIONAL Select your institution to access the SPIE Digital Library.
PERSONAL Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.