Large field-of-view rapid sky surveys are pivotal methodologies for research in time-domain astronomy. The project entitled ”Antarctic Time Domain Astronomical Optical Observational Array Based on Drift Scanning CCD Technology”, also known as the Antarctic Tianmu Plan, is based in Antarctica and comprises an assemblage of numerous small wide-field optical telescope systems. This expansive array covers a sky area of 10,000 square degrees. Each wide-field optical telescope unit is fitted with a low noise drift scanning CCD camera, facilitating rapid observations without the necessity of moving parts within the telescope system. The advantageous clear polar night conditions of Antarctica are employed to enable repeated and continuous wide-area observations, providing an optimal environment for the monitoring of transient events. A prototype of the Antarctic Tianmu Program was constructed from 2020 to 2022 and subsequently dispatched to the Zhongshan Station in Antarctica for installation, debugging, and operational observation in concurrence with the 39th scientific research vessel at the culmination of 2022. This manuscript primarily presents the quality of raw images and limiting magnitudes acquired at varying exposure times, observational results encompassing photometry precision, and the long-term stability of the system operation during the initial year of observation.
Lijiang Exoplanet Tracker (LijET) was designed to detect exoplanets with extremely high precision radial velocity (RV) measurements, and it was mounted on 2.4m telescope at Lijiang Observatory in 2011. The Dispersed Fixed- Delay Interferometry (DFDI) mode of LiJET is a combination of a thermally compensated monolithic michelson interferometer and a cross-dispersed echelle spectrograph. When the slit width is 1.6”, the spectral resolution is 18000. With a 4k x 4k CCD, the spectrograph has wavelength coverage of 390nm-690nm. The temperature stability of the instrument is 25±0.001°C, and the pressure stability of the instrument is 10.9±0.001psi. LiJET realize high precision RV measurements by measuring the phase shifts of fringes in the slit direction. Differential RV is a function of light speed, phase shift, wavelength and optical delay. Thus, optical delay is necessary to be determined accurately to take differential RV measurements to derive precise RV. We used thorium argon (ThAr) and tungsten lamp to calibration the DFDI spectrum of LiJET, and then to calculate the optical delay at different channels on the CCD detector.
The Antarctica Plateau with high altitude, low water vapor and low thermal emission from the atmosphere is known as one of the best sites on the earth for conducting astronomical observations from the near infrared to the sub-millimeter. Many optical astronomical telescopes are proposed by Chinese astronomical society at present, such as Kunlun Dark Universe Survey Telescope (KDUST), 6.5-meter optical telescopes and 12-meter optical and infrared telescopes. Accurate estimation of the sky background brightness of proposed sites provides the scientific basis for instruments design and observatory site selection. Based on this requirement, a near-infrared sky brightness monitor (NISBM) based on InGaAs photoelectric diode is designed by using the method of chopper modulation and digital lock-in amplifier in the near infrared band of J, H, Ks. The adaptability of the monitor under extremely low temperature conditions in Antarctica is promoted by taking advantage of PID heating and fault detection system. Considering the weak signal of Ks band in Antarctica, a surface blackbody is equipped for real-time calibration. For the adverse circumstances to human, an EPICS and Web based Remote Control Software is implemented for unattended operation. The NISBM has been successfully installed in Dome A, Antarctica on January 2019.
KEYWORDS: Sensors, Observatories, Calibration, Black bodies, Near infrared, Indium gallium arsenide, Temperature metrology, Signal to noise ratio, Infrared radiation, Electronics
The Ngari (Ali) observatory is located in Ngari, Tibet, a region known as “the roof of the roof of the world.” The observatory benefits from abundant photometric nights, low perceptible water vapor, high transmittance, and good seeing. Due to these advantages, it promises to be one of the best locations in the world at which to make infrared and submillimeter observations. However, no data on the sky background radiation at this location are available, impacting the planning of future facilities at the observatory. To remedy this deficiency, a near-infrared sky brightness monitor (NISBM) has been designed to obtain data in the J, H, and Ks bands. This monitor is based on an InGaAs photoelectric diode and uses chopper modulation and digital lock-in amplifier processing, which considerably enhance its signal-to-noise ratio, detectivity, and data acquisition speed. An independent device has been designed for each band (J, H, and Ks) and calibrated in the laboratory. The NISBM was installed at the Ngari observatory in July 2017 and has obtained the first NIR sky brightness data for that location.
The site testing shows that Antarctic Dome A is one of the best site on earth for astronomical observations, for wavelength ranging from visible to infrared and sub-millimeter. Continuous observation for nearly four months in polar nights makes Dome A quite suitable for time domain astronomy. In the past decade CCAA already led a series of Antarctic astronomy activities and telescope projects which will be introduced in this paper. The first generation telescope is Chinese Small Telescope Array known as CSTAR, which was composed of four identical telescopes with 145mm entrance pupil, 20 square degrees FOV and different filters, all pointing to the celestial South Point, mainly used for variable stars detection and site testing. The telescope was deployed in Dome A in Jan. 2008, and followed by automatic observations for four consecutive winters. Three Antarctic Survey Telescopes (AST3) is the second generation telescope capable of pointing and tracking in very low temperature, with 500mm entrance pupil, 8.5 square degree FOV. AST3-1 and AST3-2 were respectively mounted on Dome A in Jan. 2012 and 2015, fully remotely controlled for supernovae survey and exoplanets searching. In Aug. 2017, AST3-2 successfully detected the optical counterpart of LIGO Source GW 170817. Now AST3-3 is under development for both optical and near infrared sky survey by matching different cameras. Based on the experience of the above smaller sized optical telescopes, the 2.5m Kunlun Dark Universe Survey Telescope (KDUST) was proposed for high resolution imaging over wide field of view. Currently the KDUST proposal was submitted to the government and waiting for project review.
Tibet is known as the third pole of the earth. The Ngari (Ali) observatory in Tibet is a good site, and promising to be one of the best place for infrared and submillimeter observations in the world. However, there is no data available for sky background brightness in such place. In the near infrared band of J, H, Ks, a NIR sky brightness monitor (NISBM) is designed based on InGaAs photoelectric diode. By using the method of chopper modulation and digital lock-in amplifier processing, the SNR (Signal Noise Ratio), detectivity and the data acquisition speed of the device is greatly improved. The NISBM has been installed in Ngari observatory in July of 2017 and obtained the first data of NIR sky brightness at Ngari observatory.
Infrared sky background level is an important parameter of grounded infrared astronomy observations, which should be firstly measured in a good infrared observatory site, and only the site with low background level is suitable for infrared observations. Infrared sky background level can provide background data for the design of related infrared instruments. However, there is no such data available for major sites in China. Based on the requirement, In order to supplement the current site survey data and guide the design of future infrared instruments, a multiband near-infrared sky brightness monitor (MNISBM) based on an InSb sensor is designed in this paper. The MNISBM consists of optical system, mechanical structure and control system, detector and cooler, high gain readout electronic system, operational software. It is completed and carried out an experimental measurement in the laboratory. The result shows that the sensitivity of the MNISBM meets the requirements of the measurement of near-infrared sky background level.
Access to the requested content is limited to institutions that have purchased or subscribe to SPIE eBooks.
You are receiving this notice because your organization may not have SPIE eBooks access.*
*Shibboleth/Open Athens users─please
sign in
to access your institution's subscriptions.
To obtain this item, you may purchase the complete book in print or electronic format on
SPIE.org.
INSTITUTIONAL Select your institution to access the SPIE Digital Library.
PERSONAL Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.