MUSCAT is a new 1.1 mm band receiver which was installed on the 50 m Large Millimeter Telescope atop Volc´an Sierra Negra in Puebla, Mexico during the final quarter of 2021 and commissioned on sky throughout 2022. MUSCAT uses a novel cooling chain consisting of a commercial pulse tube cooler, two thermal stages of passively-switched continuous sorption coolers, and a final miniature dilution refrigerator. Through this system MUSCAT achieves a continuous temperature of 120 mK at the focal plane and has shown continuous operation at this temperature for greater than 100 days during readiness testing. Through minimising the amount of helium-3 required, the design on MUSCAT’s cryogenic systems produced a reliable, cost-effective cooling platform. Here we present the cryogenic design and performance of MUSCAT on-sky and compare this to that achieved during deployment-readiness testing at Cardiff (UK). We consider both cooldown time and achieved base temperature. We look at the impact on operation of relocating a pulse-tube cooled instrument from a development lab running on a 50 Hz mains electricity supply to a site running at 60 Hz. Finally, we describe the process of preparing the MUSCAT instrument for shipping and assess the success of this process in terms of remedial work required upon arrival.
Astronomy in the millimetre and sub-millimetre spectrum aims at unveiling the processes behind the origin and evolution of our Universe at various scales, from protostars to the Cosmic Microwave Background. To carry out such observations, novel imaging and spectroscopy instruments covering the Tera-Hertz range are needed. At present, high-resolution spectroscopy is carried out with heterodyne detectors, using either Superconductor-Insulator-Superconductor-mixers or Hot-Electron Bolometer mixers, inherently limited in bandwidth and difficult to multiplex. Imaging is accomplished with detectors working near photo-noise level, primarily Transition Edge Sensors or Microwave Kinetic Inductance Detectors arrays, for which the focal optics needs scaling to reach the sensitivity needed for future cosmology experiments. In this work, the simulated design of a single pixel constituted of a set of antenna-coupled detectors receiving the light focused by a metamaterial-based phase-engineered lenslet is presented. This technology relies on standard lithography fabrication techniques and enables compact and broadband imaging and spectroscopy on-chip.
The MUSCAT camera is a second-generation continuum camera at the 50-m Large Millimetre Telescope (LMT) operating in the 1.1 mm band, installed in late 2021 and commissioned in early 2022. The instrument’s focal plane has 1458 horn-coupled lumped-element kinetic inductance detectors (LEKIDs) divided into six arrays deposited on three silicon wafers. This work presents the preliminary on-sky performance results of the focal plane obtained during the commissioning campaign. We characterise the detector’s beam size and shape, mapping the point-like source 3C 279 along the focal plane using raster scans, known as beam mapping. It also allows us to identify which resonance frequencies correspond to each detector located in the focal plane, which leads us to a more complete understanding of the behaviour of the detectors, providing us with a reasonable estimation of the array yield. Finally, we compare these results with those obtained during the characterization of the focal plane in the Cardiff laboratory, previously reported in Tapia et al. 2020.
We present the design and science goals of SPT-3G+, a new camera for the South Pole Telescope, which will consist of a dense array of 34100 kinetic inductance detectors measuring the cosmic microwave background (CMB) at 220, 285 and 345 GHz. The SPT-3G+ dataset will enable new constraints on the process of reionization, including measurements of the patchy kinematic Sunyaev-Zeldovich effect and improved constraints on the optical depth due to reionization. At the same time, it will serve as a pathfinder for the detection of Rayleigh scattering, which could allow future CMB surveys to constrain cosmological parameters better than from the primary CMB alone. In addition, the combined, multi-band SPT-3G and SPT-3G+ survey data, will have several synergies that enhance the original SPT-3G survey, including: extending the redshift-reach of SZ cluster surveys to z > 2; understanding the relationship between magnetic fields and star formation in our Galaxy; improved characterization of the impact of dust on inflationary B-mode searches; and characterizing astrophysical transients at the boundary between mm and sub-mm wavelengths. Finally, the modular design of the SPT-3G+ camera allows it to serve as an on-sky demonstrator for new detector technologies employing microwave readout, such as the on-chip spectrometers that we expect to deploy during the SPT-3G+ survey. In this paper, we describe the science goals of the project and the key technology developments that enable its powerful yet compact design.
MUSCAT is a new platform for mm/sub-mm astronomy at the 50m LMT. It is currently configured for 1.1 mm continuum observations with a focal plane consisting of 1458 feedhorn-coupled LEKIDs read out over six frequency division multiplexed RF readout chains with ~250 detectors per readout. We present the performance of the detector readout and tuning system following the initial on-sky commissioning campaign in late 2021. We give details of the readout hardware, the instrument control software, the interfaces between the instrument and telescope control systems, and the automated tuning system for maintaining background-limited performance over the course of an observing night given the varying atmospheric load.
The Mexico-UK Submm Camara for Astronomy (MUSCAT) is a 1.1 mm receiver comprising 1458 Horn-Coupled Lumped Element Kinetic Inductance Detectors (LEKIDs) built through a collaborative effort led by Cardiff University in the UK and the Instituto Nacional de Astrofísica, Óptica y Electrónica (INAOE) in Mexico. MUSCAT was successfully installed on the 50 m diameter Large Millimeter Telescope (LMT) Alfonso Serrano, in December 2021
Here we provide an overview of the MUSCAT platform and present on-sky engineering tests results from scientific commissioning data.
Access to the requested content is limited to institutions that have purchased or subscribe to SPIE eBooks.
You are receiving this notice because your organization may not have SPIE eBooks access.*
*Shibboleth/Open Athens users─please
sign in
to access your institution's subscriptions.
To obtain this item, you may purchase the complete book in print or electronic format on
SPIE.org.
INSTITUTIONAL Select your institution to access the SPIE Digital Library.
PERSONAL Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.