LiteBIRD is the Cosmic Microwave Background (CMB) radiation polarization satellite mission led by ISAS/JAXA. The main scientific goal is to search for primordial gravitational wave signals generated from the inflation epoch of the Universe. LiteBIRD telescopes employ polarization modulation units (PMU) using continuously rotating half-wave plates (HWP). The PMU is a crucial component to reach unprecedented sensitivity by mitigating systematic effects, including 1/f noise. We have developed a 1/10 scale prototype PMU of the LiteBIRD LFT, which has a 5-layer achromatic HWP and a diameter of 50 mm, spanning the observational frequency range of 34-161 GHz. The HWP is mounted on a superconducting magnetic bearing (SMB) as a rotor and levitated by a high-temperature superconductor as a stator. In this study, the entire PMU system is cooled down to 10 K in the cryostat chamber by a 4-K Gifford-McMahon (GM) cooler. We propagate an incident coherent millimeter-wave polarized signal throughout the rotating HWP and detect the modulated signal. We study the modulated optical signal and any rotational synchronous signals from the rotation mechanism. We describe the testbed system and the preliminary data acquired from this setup. This testbed is built to integrate the broadband HWP PMU and evaluate the potential systematic effects in the optical data. This way, we can plan with a full-scale model, which takes a long time for preparation and testing.
This conference presentation was prepared for the Millimeter, Submillimeter, and Far-Infrared Detectors and Instrumentation for Astronomy XI conference at SPIE Astronomical Telescopes + Instrumentation, 2022.
LiteBIRD is a future space mission designed to observe the polarization of the cosmic microwave background (CMB) radiation. LiteBIRD employs polarization modulator units (PMUs) at telescope apertures to mitigate 1/f noise and systematic uncertainties. The PMU employed in the Low-Frequency Telescope (LFT) consists of a broadband achromatic half-wave plate (HWP) and a cryogenic rotation mechanism. A superconducting magnetic bearing, which is a rotor levitation type bearing, is used to eliminate physical friction. A contactless AC synchronous motor consisting of SmCo permanent magnets and copper coils is employed as the drive mechanism. One of the technical challenges for the PMU development is to reduce the heat dissipation generated by the rotation mechanism during cryogenic operation. We evaluated the heat dissipation owing to the eddy currents generated from the rotor in the rotation mechanism at room temperature. We performed a rotor spindown measurement using a breadboard model of the PMU. We established that eddy currents generated from the motor coil were dominant in the rotor at room temperature, and its estimated value was 3.91 ± 0.91 mW.
LiteBIRD, the Lite (Light) satellite for the study of B-mode polarization and Inflation from cosmic background Radiation Detection, is a space mission for primordial cosmology and fundamental physics. JAXA selected LiteBIRD in May 2019 as a strategic large-class (L-class) mission, with its expected launch in the late 2020s using JAXA's H3 rocket. LiteBIRD plans to map the cosmic microwave background (CMB) polarization over the full sky with unprecedented precision. Its main scientific objective is to carry out a definitive search for the signal from cosmic inflation, either making a discovery or ruling out well-motivated inflationary models. The measurements of LiteBIRD will also provide us with an insight into the quantum nature of gravity and other new physics beyond the standard models of particle physics and cosmology. To this end, LiteBIRD will perform full-sky surveys for three years at the Sun-Earth Lagrangian point L2 for 15 frequency bands between 34 and 448 GHz with three telescopes, to achieve a total sensitivity of 2.16 μK-arcmin with a typical angular resolution of 0.5° at 100 GHz. We provide an overview of the LiteBIRD project, including scientific objectives, mission requirements, top-level system requirements, operation concept, and expected scientific outcomes.
LiteBIRD has been selected as JAXA’s strategic large mission in the 2020s, to observe the cosmic microwave background (CMB) B-mode polarization over the full sky at large angular scales. The challenges of LiteBIRD are the wide field-of-view (FoV) and broadband capabilities of millimeter-wave polarization measurements, which are derived from the system requirements. The possible paths of stray light increase with a wider FoV and the far sidelobe knowledge of -56 dB is a challenging optical requirement. A crossed-Dragone configuration was chosen for the low frequency telescope (LFT : 34–161 GHz), one of LiteBIRD’s onboard telescopes. It has a wide field-of-view (18° x 9°) with an aperture of 400 mm in diameter, corresponding to an angular resolution of about 30 arcminutes around 100 GHz. The focal ratio f/3.0 and the crossing angle of the optical axes of 90◦ are chosen after an extensive study of the stray light. The primary and secondary reflectors have rectangular shapes with serrations to reduce the diffraction pattern from the edges of the mirrors. The reflectors and structure are made of aluminum to proportionally contract from warm down to the operating temperature at 5 K. A 1/4 scaled model of the LFT has been developed to validate the wide field-of-view design and to demonstrate the reduced far sidelobes. A polarization modulation unit (PMU), realized with a half-wave plate (HWP) is placed in front of the aperture stop, the entrance pupil of this system. A large focal plane with approximately 1000 AlMn TES detectors and frequency multiplexing SQUID amplifiers is cooled to 100 mK. The lens and sinuous antennas have broadband capability. Performance specifications of the LFT and an outline of the proposed verification plan are presented.
LiteBIRD is a JAXA-led Strategic Large-Class mission designed to search for the existence of the primordial gravitational waves produced during the inflationary phase of the Universe, through the measurements of their imprint onto the polarization of the cosmic microwave background (CMB). These measurements, requiring unprecedented sensitivity, will be performed over the full sky, at large angular scales, and over 15 frequency bands from 34 GHz to 448 GHz. The LiteBIRD instruments consist of three telescopes, namely the Low-, Medium-and High-Frequency Telescope (respectively LFT, MFT and HFT). We present in this paper an overview of the design of the Medium-Frequency Telescope (89{224 GHz) and the High-Frequency Telescope (166{448 GHz), the so-called MHFT, under European responsibility, which are two cryogenic refractive telescopes cooled down to 5 K. They include a continuous rotating half-wave plate as the first optical element, two high-density polyethylene (HDPE) lenses and more than three thousand transition-edge sensor (TES) detectors cooled to 100 mK. We provide an overview of the concept design and the remaining specific challenges that we have to face in order to achieve the scientific goals of LiteBIRD.
We present a breadboard model development status of the polarization modulator unit (PMU) for a low-frequency telescope (LFT) of the LiteBIRD space mission. LiteBIRD is a next-generation cosmic microwave background polarization satellite to measure the primordial B-mode with the science goal of σr < 0.001. The baseline design of LiteBIRD consists of reflective low-frequency and refractive medium-and-high-frequency telescopes. Each telescope employs the PMU based on a continuous rotating half-wave plate (HWP) at the aperture. The PMU is a critical instrument for the LiteBIRD to achieve the science goal because it significantly suppresses 1/f noise and mitigates systematic uncertainties. The LiteBIRD LFT PMU consists of a broadband achromatic HWP and a cryogenic rotation mechanism. In this presentation, we discuss requirements, design and systematic studies of the PMU, and we report the development status of the broadband HWP and the space-compatible cryogenic rotation mechanism.
We present our design and development of a polarization modulator unit (PMU) for LiteBIRD space mission. LiteBIRD is a next generation cosmic microwave background (CMB) polarization satellite to measure the primordial B-mode. The science goal of LiteBIRD is to measure the tensor-to-scalar ratio with the sensitivity of δr < 10-3. The baseline design of LiteBIRD is to employ the PMU based on a continuous rotating half-wave plate (HWP) at a telescope aperture with a diameter of 400 mm. It is an essential for LiteBIRD to achieve the science goal because it significantly reduces detector noise and systematic uncertainties. The LiteBIRD PMU consists of a multi-layered sapphire as a broadband achromatic HWP and a mechanism to continuously rotate it at 88 rpm. The whole system is maintained at below 10K to minimize the thermal emission from the HWP. In this paper, we discuss the current development status of the broadband achromatic HWP and the cryogenic rotation mechanism.
Access to the requested content is limited to institutions that have purchased or subscribe to SPIE eBooks.
You are receiving this notice because your organization may not have SPIE eBooks access.*
*Shibboleth/Open Athens users─please
sign in
to access your institution's subscriptions.
To obtain this item, you may purchase the complete book in print or electronic format on
SPIE.org.
INSTITUTIONAL Select your institution to access the SPIE Digital Library.
PERSONAL Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.