Paper
15 May 1997 Broad beam neutral ion machining for patterning of substrates
Helen E. Fawcett, Thomas G. Bifano
Author Affiliations +
Abstract
Broad beam neutral ion machining is investigated as a process for patterning submicrometer features. An ion machining system (IMS) has been designed and constructed to conduct the ion machining experiments on large samples using an 11 cm diameter ion source. A series of experiments were conducted with this broad beam argon ion source impinging on photoresist-masked silicon and glass substrates. A calibration mask with representative features characteristic of those used in diffraction gratings compact discs, and magneto-optical storage devices has been produced and used to evaluate the achievable pattern resolution of the photoresist layer. Several photoresists have been used to generate sub-micrometer features, and their performance as mask materials is compared.
© (1997) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Helen E. Fawcett and Thomas G. Bifano "Broad beam neutral ion machining for patterning of substrates", Proc. SPIE 3010, Diffractive and Holographic Device Technologies and Applications IV, (15 May 1997); https://doi.org/10.1117/12.274411
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Ions

Photoresist materials

Scanning electron microscopy

Silicon

Optical lithography

Photomicroscopy

Photomasks

Back to Top