This will count as one of your downloads.
You will have access to both the presentation and article (if available).
The Subaru Telescope primary mirror was recoated with Aluminum on October 20, 2017. It was the eighth coating work from its arrival at Maunakea, Hawaii in 1998 and was about four years from the previous recoating. Before the recoating work, the reflectivity measured with the spectrophotometer was 70~76 % (@400 nm), 75~80 % (@600 nm), and 73~78 % (@800 nm). The large dispersion of the reflectivity is from non-uniform contamination of the surface, especially from the accumulation of dust particles on the mirror.
After the fresh coating of Aluminum, the values returned to 92.1 % (@400 nm), 90.5 % (@600 nm), and 85.8 % (@800 nm) with standard deviation less than 0.6 %. There were the data taken at the outside of the vacuum chamber right after the recoating.
The great advantage of our spectrophotometer is its capability of getting absolute spectroscopic reflectivity of the primary mirror in-situ. We can continue to monitor the reflectivity of the primary mirror in-situ using this spectrophotometer, even after the primary mirror is mounted on the telescope. This helps us better understanding of the long-term reflectivity degradation.
Different approaches are being implemented to take care of these issues. The PID control of the image rotator has been tuned to reduce their high-frequency contribution. We are working with the telescope team to tune the motor drives and reduce the impact of the elevation encoder. A Linear Quadratic Gaussian controller (LQG, or Kalman filter) is also being implemented inside SCExAO to control these vibrations. These solutions will not only improve significantly SCExAOs performance, but will also help all the other instruments on the Subaru Telescope, especially the ones behind AO188. Ultimately, this study will also help the development of the TMT, as these two telescopes share very similar drives.
View contact details
No SPIE Account? Create one
